IPX VE-3500 Installation & Operation Manual Download Page 83

Page: 83 / 94

5.2.4 The Image Viewer

The

Video Server is equipped with a digital watermark. It's a checking software which

protects archived images and informs you whether the images have been modified or

not. Follow the instructions below to open an archived image from an SD card or an

HDD.

This is image integrity-protection software. It not only allows you to view an archived

image from the SD card or HDD of a computer, but also protects an archived image

from reproduction or interpolation. If an image isn’t in the original format made by a

Video Server, the Image Viewer will not display the image and instead will send a

warning message, "

Not Correct Image

", right away. Close this message to enable

you to see the image now.

1. Pop up the

START

menu in your computer, and point to

Programs

surveillance

to open up the program selection page. Click the

Image Viewer

tag

to start the

Image Viewer

program (see a sample screen below).

2. Click

the

RELOAD

tag to load the images from a path.

3. Click

the

PRINT

tag to get a displayed image printed out from a printer.

Summary of Contents for VE-3500































































































Search results

Summary of Contents for VE-3500

Reviews:

Related manuals for VE-3500

Brands by name

Popular brands

IPX VE-3500, Installation & Operation Manual

Search results

Summary of Contents for VE-3500

Reviews:

Related manuals for VE-3500

Brands by name

Popular brands