IPX VE-3500 Installation & Operation Manual Download Page 77

Page: 77 / 94

(3) Select the recording time: Sets the periods of time in recording.

Select the Begin time and the End time the time markers will display above. Please use

the up (increase) and down (decrease) arrows to adjust the setting.

Add the selected period schedule. You can also hold down the left mouse button to

drag a period.

Erase the selected period schedule. You can also use the right mouse button to

cancel the period.

(4) Select the recording mode.

(5) Press to show the scheduled recording list.

(6) Set the secondary schedule: Activate or inactivate the

other recording modes besides the primary schedule.

(7) Option

buttons:

Undo: Undo the latest changes.

Clear: Clear all the schedule markers in the current

editing area.

Save: Apply the changes.

Close: Close the window.

(5) Sequence Views

This function enables you to use four modes to set the sequence of displays you want for the

Sequence Mode

of the

Live Monitor

Summary of Contents for VE-3500































































































Search results

Summary of Contents for VE-3500

Reviews:

Related manuals for VE-3500

Brands by name

Popular brands

IPX VE-3500, Installation & Operation Manual

Search results

Summary of Contents for VE-3500

Reviews:

Related manuals for VE-3500

Brands by name

Popular brands