IPLINK Technology Corp.
IP-WDL-RT1T1R-B 150M Wireless N ADSL2+ Router
Set Priority:
The priority of the rule. It can be p0(highest), p1, p2, p3(lowest). The traffic
matches the rule will be assigned the priority you have configured.
Insert or modify QoS mark:
You can insert or modify the DSCP or 802.1p tag. The traffic
matches the rule will be added or modified the mark.
Note:
If you select 802.1p tag, please make sure 802.1q is enabled in specified WAN interface;
otherwise 802.1p tag will not be tagged.
Apply:
After filling the parameters, click this button to add a new rule.
QoS Rule List:
Shows the current rules on the device.
Delete:
Select a rule then press the
delete
button, the selected rule will be deleted from QoS
rule list.
Delete all:
Delete all the rules from QoS rule list.
4.3.3.2 802.1p
If the QoS policy is “802.1p based”, you should configure the 802.1p setting.
Step 1.
Select “802.1p based” from the QoS Policy drop-down list. The following available
options will change to offer the appropriate settings.
56
Summary of Contents for IP-WDL-RT1T1R-B
Page 1: ...Rev 2 0 0 1910020564...
