IPLINK Technology Corp.
IP-WDL-RT1T1R-B 150M Wireless N ADSL2+ Router
The WPS Configuration Screen of Wireless Adapter
Note:
1. The default PIN code of the Router can be found in its label or the WPS configuration screen
as shown in Figure 4-24.
2. After saving your configuration, you need to click the
Save
button on the left panel to make
your configuration take effect.
4.2.3.7 WDS
Choose “
Setup
→
WLAN
→
WDS
” menu, and you will see the WDS settings screen (shown in
Figure 4-25). WDS, short for Wireless Distribution System, uses wireless media to communicate
with other Access Points, like the Ethernet does. With this function enabled, the Router can
communicate with two or more WLANs.
To do this, you must set these Access Points in the same channel and add MAC addresses of
other Access Points to communicate with to the Current WDS AP List.
Note:
If you want to enable the WDS, please go to the page WLAN->Basic, and select the "Mode" to be
AP+WDS.
43
Summary of Contents for IP-WDL-RT1T1R-B
Page 1: ...Rev 2 0 0 1910020564...
