IPLINK Technology Corp.
IP-WDL-RT1T1R-B 150M Wireless N ADSL2+ Router
49
WAN Interface:
The interface on which the virtual server used on WAN side
WAN IP Address:
The IP address which the virtual server used on WAN side. You can
access this IP and WAN port from WAN side to obtain the service.
WAN Port:
The open port on WAN side. It can be either a single port or a port range.
LAN Open Port:
The open port on LAN host. It can be either a single port or a port range.
LAN IP Address:
The IP address of the host which provides the service on LAN side.
Click the
Apply Changes
button to save your configuration.
Note:
After configuration, you need to click the
Save
button appeared on the left panel so that your
configuration can still take effect after the Router reboots.
For example:
If you want to set up a FTP Server on LAN host 192.168.1.33, you can configure a
virtual server rule as follows:
Step 1:
Select “FTP” from
Usual Service Name
drop-down list.
Protocol
,
WAN Port
, and
LAN
Open Port
will be automatically filled, and you don’t need to change them.
Step 2:
Select the
WAN Setting
for the service.
Step 3:
Enter 192.168.1.33 in
LAN IP Address
field.
Step 4:
Click
Apply Changes
button to save your configuration. And the Virtual Server will be
added to the
Current Virtual Server Forwarding Table
.
Step 5:
Click
Save
button on the left panel to make sure your configuration can still take effect
after the Router reboots.
4.3.2.3 ALG
Choose “
Advanced
→
NAT
→
ALG
”, and then you can configure the ALG settings in the screen as
shown in Figure 4-31. The router supports several NAT ALG and pass-Through function. Here you
can enable or disable the ALG or pass-through function for each application.
Summary of Contents for IP-WDL-RT1T1R-B
Page 1: ...Rev 2 0 0 1910020564...
