IPLINK Technology Corp.
IP-WDL-RT1T1R-B 150M Wireless N ADSL2+ Router
broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM
Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast
messages. The default value is 1.
Broadcast SSID:
When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Router. To broadcast the Router’s
SSID, select “Enable”. If you don’t want to broadcast the Router’s SSID, select “Disable”.
After configuration, click
Apply Changes
button to save your changes.
Note:
1. These settings are only for more technically advanced users who have a sufficient knowledge
about wireless LAN. They should not be changed unless you know exactly what will happen
for the changes on your Access Point.
2. After
configuration, you need to click the
Save
button appeared on the left panel so that your
configuration can still take effect after the Router reboots.
4.2.3.6 WPS
Choose “
Setup
→
WLAN
→
WPS
” menu, and you will see the Wi-Fi Protected Setup screen (shown
in Figure 4-23). Wi-Fi Protected Setup (WPS) is a simple way to establish the connection between
the wireless client and access point. You don’t need to select the encryption method and
encryption key. You just need to input the correct PIN or start PBC and press the WPS/WLAN
button on the router to set the WPS.
Figure 4-23
Disable WPS:
Select to disable WPS function.
38
Summary of Contents for IP-WDL-RT1T1R-B
Page 1: ...Rev 2 0 0 1910020564...
