IPLINK Technology Corp.
IP-WDL-RT1T1R-B 150M Wireless N ADSL2+ Router
2.2 The Back Panel
Figure 2-2
POWER:
The Power plug is where you will connect the power adapter.
ON/OFF:
The switch for the power.
RESET:
There are two ways to reset the Router's factory defaults.
Method one:
With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two:
Restore the default setting from “Maintenance-Reboot” of the Router's
Web-based Utility.
1, 2, 3, 4 (LAN):
Through the port, you can connect the Router to your PC or the other
Ethernet network devices.
LINE:
Through the port, you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to 2.4.
Antenna
:
Used for wireless operation and data transmit.
5
Summary of Contents for IP-WDL-RT1T1R-B
Page 1: ...Rev 2 0 0 1910020564...
