IPLINK Technology Corp.
IP-WDL-RT1T1R-B 150M Wireless N ADSL2+ Router
VAP(0-3):
Check the
Enable
box to enable the desired VAP. The wireless stations
connected to different VAP can not communicate with each other.
SSID:
Up to four SSIDs for each VAP can be entered in the filed SSID . The name can be up
to 16 characters.
Broadcast SSID:
If you select the
Enable
box, the Wireless Router will broadcast its name
(SSID) on the air.
Authentication type:
You can choose the type for the WEP security. The default setting is
Auto
, which can select
Shared Key
or
Open System
authentication type automatically
based on the wireless station's capability and request.
4.2.3.3 Security
Choose “
Setup
→
WLAN
→
Security
” menu, and you will see the Wireless Security Setup screen
(shown in Figure 4-17). Here you can configure the security settings of your wireless network.
There are six encryptions supported by the Router: WEP, WPA (TKIP), WPA (AES), WPA2 (AES),
WPA2 (TKIP) and WPA2 Mixed.
Figure 4-17
Encryption:
There are six encryptions supported by the Router: WEP, WPA (TKIP), WPA
(AES), WPA2 (AES), WPA2 (TKIP) and WPA2 Mixed.
Use 802.1x Authentication:
If you want to use the authentication, check this box and then
set the port, IP address and password for the
Authentication RADIUS Server
.
32
Summary of Contents for IP-WDL-RT1T1R-B
Page 1: ...Rev 2 0 0 1910020564...
