10
Other controller display, as show in the figure:
“ID:0002
A”
；
ID:0002 means the controller number is No. 2 A: Indicates that the number
is automatically generated
The second set: A-0002
The third set: A-0003
3.5.Check whether each controller number is correct or needs to be renumbered. Then the first
T-780K controller long time presses the “SPEED-” button to return to the manual numbering;
the end numbering can be exited by pressing the button (any button is ok). The first T-780K
controller restarts
“Restart...”
and returns to normal play mode.
Note: When the controller is numbered, the cascaded networking ports must be connected in strict accordance
with the controller silkscreen prompt (INPUT/OUTPUT).
七、
T-780K parameter setting and function operation
Press the
“
SET
”
button, and the controller will start up and enter the parameter
setting and other function interfaces.
①.
PLAY
Built-in effect playback mode
②.
WRITE ADDRESS
Address writing mode
③.
TEST DMX ADDR
Lamps address testing mode
④.
RGB,RGBW
Lamps channel selection mode
⑤.
100-BASE
Transmission rate selection mode
1. Built-in effects mode (
support RGB/RGBW these two
kinds channel lamps
)
1.1. Press the
“
SET
”
button, and the controller will start up, enter the parameter setting and
other function interfaces, as shown in the figure:
