19
3
、
T-780K controller set MADRIX parameter
Press “
SET
”, and power on the controlller at the same time, enter MADRIX setting interface, as shown
below:
○
1 SET MADRIX
Turn on/off MADRIX software
○
2 SET Univ
Set support lights quantity
○
3 SET IC
support IC selection
Note: The parameters need to be set and set in order of 1, 2, 3, and the controller will be
restarted after completion.
3.1. Turn on/off MADRIX function
1.
Press
“
SET
”, and turn on the controller at the same time, enter the MADRIX setting
parameter interface.
