iPixel LED Light T-780K, Operation Manual

Page: 14 / 22

14
3.3. Press “ SET ” enter the lamps testing interface, as show below in the figure:
①. AC: **** Automatic test
②. MC: **** Manual test
③. ALL
：
All ports
④. CH MODE
：
Channel(can amnually select)
3.4. Press “
MODE
” to start the test, as show in the figure:
3.5. Press “ MODE ” to switch the testing channel slection;
Press “ SET ” to switch the manual and automatic channel testing mode;
Press “ SPEED+ ” and “ SPEED- ” to adjust the lamp numbers under the manual channel
testing mode.
Lamp test vocabulary definition
Automatic mode:AC Definition Manual mode:MC Definition
AC
：
**** ALL
CH MODE: RGBW
1 channel
automatic test
MC
：
**** ALL
CH MODE: RGBW
1 channel manual
test
AC
：
**** ALL
CH MODE: RG,BW
2 channel
automatic test
MC
：
**** ALL
CH MODE: RG,BW
2 channel manual
test
AC
：
**** ALL
CH MODE: R,G,B
3 channel
automatic test
MC
：
**** ALL
CH MODE: R,G,B
3 channel manual
test
AC
：
**** ALL
CH MODE: R,G,B,W
4 channel
automatic test
MC
：
**** ALL
CH MODE: R,G,B,W
4 channel manual
test
Note 1: Automatic and manual test mode switching: AC is the automatic test mode, MC is the manual test
mode, and is switched by the
“
SET
”
key;
Note 2: luminaire channel switching, RGBW is a monochrome single-channel luminaire; RG, BW is a two-color
two-channel luminaire; R, G, B are three-color luminaire; R, G, B, W are RGBW four-color luminaire, by
"MODE
”
Key switch;
Note 3: **** is the lamp number; in the automatic test mode, after the number is automatically incremented
to the maximum value, the test starts again from 0001; in the manual test mode, the number is manually
adjusted by
“
SPEED+
”
and
“
SPEED-
”
.
3.6. Complete the test, power off and restart, the controller can enter the normal mode.
4. Lamp channel selection mode (built-in effect playback supports RGB/RGBW IC
channel selection)
4.1. Press the
“
SET
”
button, and the controller will start up, enter the parameter setting and other
function interface 1.