20
2. Press the
“
MODE
”
button to move the arrow to select
“
SET MADRIX
”
to enable/disable
the MADRIX function, as shown below.
3. Press
“
SET
”
to confirm entry, open/close Mai Jue; as shown below;
1. Open MADRIX function
2. Close MADRIX function
4. Press the
“SPEED+”
and
“SPEED-”
buttons to move the arrow up and down to select the
On/Off option.
5. Press the
“
MODE
”
button to confirm the selection and display the following picture:
OR
6. Select to complete the selection, press the
“
SET
”
button to exit, and return to the MADRIX
setting interface.
3.2. Set the number of lamps on board
1. Press the
“
SET
”
button, and the controller will start up and enter the Mai Jue set parameter
interface.
2. Press the
“
MODE
”
button to move the arrow and select
“
SET Univ
”
to set the number of
lamps on the load, as shown below.
3. Press
“
SET
”
to confirm the entry and set the number of lamps on load; as shown below;
○
1 Univ 1 1 unit
（
170 pixels
）
○
2 Univ 2 2 units
（
340 pixels
）
○
3 Univ 3 3 unites
（
510 pixels
）
4. Press the
“
SPEED+
”
and
“
SPEED-
”
keys to adjust the number and select the controller
load unit option.
