Ytterbium Fiber Laser, Model YLR-200-AC
IPG Laser GmbH, 2009
Proprietary Information. All rights reserved
Rev. Date 08-12-2009
15
Cleaning with cleaning buds
CAUTION:
Never touch the top of the cleaning bud with fingers and use every bud only
one time.
Repeat the cleaning process (p12 – 9.3) with acetone instead of Isopropanol. The cleaning
procedure can always be stopped if a good result has already been achieved.
It is recommended to clean the surface with Isopropanol again after a cleaning with acetone
was done.
CAUTION:
Risk of damage at the fiber connectors.
Misuse, inaccurate cleaning, use of not intended chemicals can lead to
damage at the fiber connector. These damages are not covered by the
warranty
••••
Activities at the fiber connectors are only to be executed according to
the manual. The allowed cleaning materials and procedure of cleaning are
explained in the according chapter.
6. Install the cleaned connector in the bayonet fixing or an optical head or the beam switch and close the
fixing.
7. If the fiber is not to be connected instantly with a suitable optical component recap it with the protection
cap. Do not forget to clean the cap before use.
