background image

                                                                                                            Ytterbium Fiber Laser, Model YLR-200-AC

 

                                                                                                      

IPG Laser GmbH, 2009                                                                                           

 

Proprietary Information. All rights reserved 

Rev. Date 08-12-2009 

 

29 

Driver Software 

 
Any  driver  software  provided  now  or  in  the  future  is  provided  solely  under  non-exclusive  license  from  IPG 
Laser.  By using the software, you agree to the terms herein.  The driver software is protected by trade secret 
laws, United States copyright laws and international treaty provisions.  IPG Laser reserves all ownership rights.  
The owner of the device may only use the driver software only with the product(s) identified by IPG Laser, and 
may  make  duplicate copies of the  software  solely for archival  backup purposes.  Any  alterations of the driver 
software will void the warranty on the equipment provided by IPG Laser.   
 
The driver software is provided “as is” with no warranties whatsoever, whether express or implied, including the 
warranties of fitness for a particular purpose.   IPG Laser does not warrant that the functions contained in the 
software  will  meet  the  user’s  requirements  or  that  the  operation  of  the  equipment  or  driver  software  will  be 
uninterrupted  or  error  free.  Not  all  driver  software  has  gone  through  IPG  Laser’s  normal  quality  control  or 
product  purposes,  but  is  provided  to  users  as  an  accommodation  to  respond  to  their  requests.    End-user 
support  is  not  implied  or  provided,  and  you  are  assumed  to  have  working  knowledge  of  a  particular 
development  language.    IPG  Laser  may  make  changes  to  the  driver  software  and  has  no  obligation  to 
distribute newer versions.   
 

EXCEPT  FOR  THE  LIMITED  WARRANTIES  EXPRESSLY  SET  FORTH  ABOVE,  IPG  SPECIFICALLY 
DISCLAIMS ANY AND ALL OTHER WARRANTIES TO BUYER,  INCLUDING WITHOUT LIMITATION, ANY 
AND  ALL  IMPLIED  WARRANTIES,  SUCH  AS  FREEDOM  FROM  INFRINGEMENT,  MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE.   

 
 
 

Exclusive Remedies 

 

THE REMEDIES PROVIDED  HEREIN  ARE BUYER’S SOLE AND EXCLUSIVE REMEDIES.  IN  NO EVENT 
SHALL  IPG  BE  LIABLE  FOR  DIRECT,  INDIRECT,  SPECIAL,  INCIDENTAL,  CONSEQUENTIAL, 
EXEMPLARY OR PUNITIVE DAMAGES (EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES) 
ARISING FROM OR RELATING TO THE PRODUCT (INCLUDING, LOSS OF PROFITS) WHETHER BASED 
ON  CONTRACT,  TORT  OR  ANY  OTHER  LEGAL  THEORY.  IPG'S  MAXIMUM  LIABILITY  WILL  NOT 
EXCEED, IN THE AGGREGATE, THE TOTAL AMOUNT PAID FOR THE PRODUCT BY BUYER. 

Summary of Contents for YLR-200-AC

































Reviews: