background image

Important Safeguards  

USC 2024-

BB 3” UNIFORM SEMI-AUTOMATIC CASE SEALER

 

2-6 

2.5  O

PERATOR 

S

KILL 

L

EVEL 

D

ESCRIPTIONS

 

Important: 

The area supervisor must ensure that the operator has been properly trained on all machine 

functions before operating the machine.

 

2.5.1 

Skill “A” Machine Operator 

This operator is trained to use the machine with the machine controls. This operator can feed cases into the 
machine, make adjustments for different case sizes, change tapes, and start/stop, and re-start production. 

2.5.2 

Skill “B” Mechanical Maintenance Technician 

This technician is trained to use the machine as the machine operator, and is able to work with the safety 
protection disconnected, check and adjust mechanical components, perform maintenance operations, and  
repair the machine. He is not allowed to work on live electrical components. 

2.5.3 

Skill “C” Electrical Maintenance Technician 

This technician is trained to use the machine as the machine operator, and is able to work with the safety 
protection disconnected, check and adjust mechanical components, perform maintenance operations, and  
repair the machine. He is allowed to work on live electrical panels, terminal blocks, and control equipment. 

2.5.4 

Skill “D” Manufacturer’s Technician 

Skilled technician sent by the manufacturer, or its agent, to perform complex repairs or modifications, when  
agreed to by the customer. 

 

Operation 

Machine Condition 

Operator Skill 

Level  

Number of 

Operators 

Machine Installation & Set-Up 

Running with Safety Protections 
Disabled 

B & C 

Adjusting Case Size 

Stopped by Pressing the 
Emergency Stop (E-Stop) Button 

Tape Roll Replacement 

Stopped by Pressing the 
Emergency Stop (E-Stop) Button 

Blade Replacement 

Electrical Power Disconnected 

Drive Belt Replacement 

Electrical Power Disconnected 

Ordinary Maintenance 

Electrical Power Disconnected 

Extraordinary Mechanical 
Maintenance 

Running with Safety Protections 
Disabled 

Extraordinary Electrical 
Maintenance 

Running with Safety Protections 
Disabled 

 

Table 2-1  Operators Skill Level 

 

Summary of Contents for Interpack USC 2024-BB 3

























































Reviews: