1. Introduction
a. Congratulations on purchasing a United Pacific
Da CoolBox
Thermoelectric Cooler.
This cooler has been specifically designed for tough road conditions and is suitable for
both the cooling and warming of foods. It is important that you read the instructions
and guidelines carefully in the manual and understand the operation to ensure that
you receive maximum performance and long-term reliability out of this appliance.
2. Product Components
a. The United Pacific
Da Coolbox
Thermoelectric Cooler comes with the following
items:
i. 12V DC Cigarette Lighter Plug
ii. 110V AC Power Adapter
iii. Shoulder strap
b. If any of these items have not been included, please contact your local United Pacific
dealer.
3. Safety Instructions
a. For the safety of all people using the United Pacific
Da CoolBox
Thermoelectric
Cooler, it is recommended that you take note of the following general safety points:
i. Connect the appliance only to a 12V DC/ 110V AC power source.
ii. When removing the plug from the socket, do not pull on the power cable.
iii. If the power supply cord is damaged, it must be replaced with the same type and
rated cord in order to avoid hazards.
iv. Do not use your cooler if there are visible signs of damage.
v. Disconnect your cooler from all power sources after each use and before cleaning
or maintenance.
vi. Do not store explosive substances, flammable liquids or gases in or near the
cooler.
vii. Do not store or transport caustic or solvent based materials in the cooler.
viii.Do not open or tamper with the refrigerant circuit.
ix. Do not remove or modify any of the electrical components.
x. Do not use sharp, abrasive or corrosive materials to clean.
xi. Repairs on these devices may only be executed by an approved repair agent.
xii. In the case of required repairs or warranty please contact the dealer or retailer
from which the purchase was made to file any warranty claim.
xiii.Make sure the ventilation slots are not covered or obstructed at any time during
operation.
xiv. The appliance is not suitable for the transport of corrosive or solvent based
substances.
xv. Food may only be stored in its original packaging or in suitable containers.
xvi.ELECTRICAL DEVICES ARE NOT TOYS. This appliance is not intended for use by
persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, unless they have been given
supervision or instruction concerning the use of this appliance by a person
responsible for their safety.
xvii.Children should be supervised to ensure they do not play with the cooler.
4. Safety Operation
a. For safe operation of your cooler, United Pacific recommends that you take note of
the following safety points:
i. Before turning your cooler on, make sure that the power supply line and plugs
are dry.
ii. Ensure that there is always sufficient ventilation around the cooler to prevent
overheating.
iii. Do not place your cooler near open flames or other heat sources (heaters, camp
fires, gas ovens, etc.).
iv. Do not fill your cooler cabinet with ice or fluids.
v. Do not place electrical devices inside your cooler.
vi. Protect your appliance and cables from rain and other environmental moisture.
vii. Do not use your cooler if you suspect that the electrical system has been
exposed to water.
viii.Do not use your cooler if it has been immersed in water.
ix. Ensure your hands are dry before handling the plug or switching on the appliance.
x. This product is suitable for camping.
xi. This appliance is not intended to be used in the household and similar applications.
xii. United Pacific is not liable for damages which are caused by non-intended use
or incorrect operation.
5. Performance & Function
a. The United Pacific Da CoolBox Thermoelectric Cooler is suitable for mobile use. It
is not intended to be used as a permanent home refrigerator or freezer. The
performance may differ depending on certain conditions such as voltage input,
thermal load, ventilation, number of times the food & drink compartment is
opened and closed.
Operation Instructions:
i. STEP 1 – Select the required power cable and connect the appliance to a suitable
power source.
ii. STEP 2 – Power on
1. Press
2. An audible BEEP will be heard & the display will illuminate
3. Fan will start
iii. STEP 3 – Select Operating Mode (Cool or Heat)
1. Press & hold
2. An audible BEEP will be heard
3. Display will illuminate
4. To switch between the COOL or HEAT function, press & hold
THERMOELECTRIC COOLER/WARMER
Item #99122
