background image

OPERATOR’S MANUAL 

HEATED LANDING ZONE (HLZ)

 

 

 
 

 
 

 

 
 
 
 

 

TABLE OF CONTENTS

 

1. WARRANTY INFORMATION............................................................................................ 1 

1.1 Warranty 

Provisions 

- Heated Landing Zone ............................................................. 1 

1.2 Parts 

Return............................................................................................................... 1 

1.3 Warranty 

Exclusions .................................................................................................. 1  

2.  PARTS ORDERING AND SERVICE INFORMATION....................................................... 2 

2.1 Ordering 

Parts ........................................................................................................... 2 

2.2 Service 

Information .................................................................................................... 2 

3. INSTALLATION AND OPERATION.................................................................................. 3 

3.1 HLZ 

Installation/Setup................................................................................................ 3 

3.2 HLZ 

Operation ........................................................................................................... 3 

4. HLZ MODEL/COMPONENT IDENTIFICATION ................................................................ 4 

5. COMPUTER OPERATION AND PROGRAMMING .......................................................... 5 

5.1 Programming 

Temperature........................................................................................ 5 

5.2 Computer 

Operation .................................................................................................. 6 

5.2  Fahrenheit to Celsius Display Change....................................................................... 7 

6. OPERATOR TROUBLESHOOTING ................................................................................. 8 

 
 

Frymaster L.L.C., 8700 Line Avenue 71106 

P.O. Box 51000, Shreveport, Louisiana 71135-1000 

PHONE 318-865-1711         FAX 318-219-7135 

 

PRINTED IN THE UNITED STATES

               

SERVICE HOTLINE  

 

 

   

1-800-24-FRYER APRIL 

2005 

www.frymaster.com                 email: service @frymaster.com       

 

*8195636* 

MANUFACTURED BY FRYMASTER, L.L.C. 

P.O. BOX 51000 

SHREVEPORT, LOUISIANA  71135-1000 

PHONE 1(318)865-1711 

1 (800) 24 FRYER 

 

This equipment chapter is to be 

inserted in the Equipment Manual.

 

Summary of Contents for Heated Landing Zone HLZ












Reviews: