IPG Interpack USC 2024-BB 3, Operations Manual & Parts List

Page: 28 / 56

USC 2024-
BB 3” UNIFORM SEMI-AUTOMATIC CASE SEALER
Set-Up Procedures
4-3
4.3 M
ACHINE
H
EIGHT
A
DJUSTMENT
WARNING: MACHINE HEIGHT ADJUSTMENT REQUIRES RAISING THE MACHINE TO
ADJUST EACH LEG. FOLLOW ALL POSSIBLE SAFETY PROCEDURES
PRIOR TO AND DURING THIS PROCESS.
The USC 2024-
BB 3” Uniform Semi-Automatic Case Sealer must be installed on near-level ground. Use the
adjustable legs to ensure that the machine is level and firmly on the ground (no rocking). Adjust the leg height
with the four telescopic extension legs to accommodate conveyor heights from 24 - 30 in. (609.6 - 762mm)
(refer to Figure 4-3).
1. To adjust the height of the Case Sealer, use a forklift to raise the machine to give ample room to extend the
legs.
2. Using a 19mm box end wrench, loosen eight 12mm hex head adjustment bolts.
3. Adjust the legs to the desired conveyor height and tighten bolts. Etched lines on the legs ease leveling.
Figure 4-3 Machine Height Adjustment