IPG Interpack USC 2024-BB 3, Operations Manual & Parts List

Page: 27 / 56

Set-Up Procedures USC 2024-
BB 3” UNIFORM SEMI-AUTOMATIC CASE SEALER
4-2
4.2 C
ASTER
I
NSTALLATION
(I
F
P
URCHASED
)
WARNING: CASTER INSTALLATION REQUIRES RAISING THE MACHINE TO ACCESS
THE BOTTOM OF EACH LEG. FOLLOW ALL POSSIBLE SAFETY
PROCEDURES PRIOR TO AND DURING THIS PROCESS.
1. With a forklift, raise the machine to allow access to the bottom of each leg (refer to Figure 4-2).
2. Screw a caster into each leg until it is firmly seated to the bottom of the leg.
3. Tighten each caster.
4. Do not adjust the conveyor height by adjusting the caster. Proper conveyor height must be achieved by
adjusting the leg extension of each leg (refer to Figure 4-3 ).
Figure 4-2 Caster Installation