IPG Interpack USA 3036-SB, Operator'S Manual & Parts List

Page: 18 / 60

UM509TW UDM10009-04
18
O
PERATING
I
NSTRUCTIONS
Once the HSD

2000 ETII Tape Heads (both bottom and top) have been loaded with
tape and threaded, the machine is ready to process regular slotted cartons. The
following instructions are presented in the order recommended for processing cartons
successfully through the USA 3036-SB Carton Sealing machine.
1. Unlock the Single locking System and raise the Top Tape Head Box to its
maximum.
2. Turn the Width Adjustment Handle to open the drive base in order to allow an
empty test carton to slide on the machine
3. Place an empty test carton with the flaps held in closed position under the bridge
of the Top Tape Head Box.
4. Adjust the self-centering side rails by turning the Width Adjustment Handle.
5. Block the Floating System by pushing the toggle clamp to "lock".
6. Lower the Top Tape head Box until it touches the top of the carton. Lock the
Single Locking System.
7. Adjust the Compression Guides on the side of the carton.
8. Remove the test carton from the machine.
9. Ensure that the electrical power is on.
10. Switch the machine "on" with the start push button.
11. Process the first carton with the flaps in the closed position.
12. When the carton exits the Carton Sealer, process the next carton.
W
ARNING
! E
NSURE THAT THE OPERATOR
'
S HANDS ARE AWAY FROM THE MOVING BELTS
OF THE SIDE DRIVE BASE ASSEMBLY
.
Note: Should any problem occur during processing that requires halting the
machine, press the red "E-Stop" mushroom button.
Note: The machine should never be washed down or subjected to conditions
causing condensation on components.