IPG Interpack USA 3036-SB, Operator'S Manual & Parts List, Page: 16 / 60

UM509TW UDM10009-04
16
S
ET
-U
P
P
ROCEDURES
3) Width Adjustment Handle
The foldable handle that is
used to adjust the width of
the self-centering side rails
is located on the left hand
side of the machine.
Unscrew and change
sides.
Figure 8
4) Tape Loading and Threading
A) Tape Loading
W
ARNING
! T
URN OFF ELECTRICAL POWER SUPPLY AND DISCONNECT THE POWER CORD
FROM THE ELECTRICAL SUPPLY BEFORE BEGINNING TO WORK ON THE
T
APE
H
EADS OR TO LOAD TAPE
. I
F POWER CORDS ARE NOT DISCONNECTED
,
SEVERE INJURY TO PERSONNEL COULD RESULT
.
The HSD2000

ET II/2’’ tape heads accommodate 2-inch wide tape rolls, while the
optional HSD2000

ET II/3’’ tape heads accommodate 3-inch wide rolls. See the label
on the side of the HSD2000

ETII tape head for the loadable tape sizes.
Push the roll of tape onto the mandrel with the adhesive side up (refer to threading
diagram on the HSD2000

ETII tape head) until the core is set against the mandrel
flange. This ensures the tape will be aligned when feeding into the tape head.