IPG Interpack USA 3036-SB, Operator'S Manual & Parts List

Page: 15 / 60

UM509TW UDM10009-04
15
S
ET
-U
P
P
ROCEDURES
3) Mirror Image Controls
Other than the electrical control box, there are three (3) other mirror image controls that
can be placed on the right or the left hand side of the machine for easier operation.
1) Single Locking System
This system is located on
the bridge of the Top Tape
Head Box and is used to
adjust the height of the
Top Tape Head to the
height of the carton. The
lever is assembled on the
left hand side. To change
sides, simply remove the
cap on the right, unscrew
the lever and screw it back
on the right side. Replace
the cap on the left side.
Figure 6
2) Locking Floating System
The lever for this system is
located on the left side of
the Top Tape Head Box. It
has toggle clamp used to
lock or unlock the floating
system. For opposite side
installation: remove red
cover cap on right hand
side, unscrew the toggle
clamp with ¾” wrench,
replace one with the other,
secure the toggle’s
position with the locknut.
Figure 7
ITEM N O .Q TY.PART N O .D ESC RIPTIO N $$ 11U PM0698FLA N G ED SC REW 1/2-13 L.H.