IPG Interpack USA 3036-SB, Operator'S Manual & Parts List, Page: 14 / 60

UM509TW UDM10009-04
14
S
ET
-U
P
P
ROCEDURES
Customer supplied infeed and exit conveyors (or rollers) must be level with the machine,
otherwise, the performance of the machine may be affected. The customer-supplied
infeed conveyor (if used) should provide straight and level entry. The customer-supplied
exit conveyor (if used) should be straight and declined no more than 1/4 inch per foot
away from the machine.
2) Electrical Connection
The electrical control can be located
on either side of the Carton Sealer
for customer convenience. It
contains the green "on" push button
and the red "E-Stop" mushroom push
button, which is to be used both for
emergency stops as well as regular
halting of the machine.
Figure 5
An eight (8) foot standard three conductor power cord with plug is provided for 115 V, 60
Hz, 15 amp electrical service. The servicing receptacle must be properly grounded.
Before the machine is plugged into the receptacle, ensure that all materials are removed
from the machine. The electrical control is protected with an automatic circuit breaker
with resettable overload.