WIP0020
Userguide
39
Example:
The ip address is 192.168.1.70. you change the port value to 8090, the
accessing address is http://192.168.1.70:8090
But if the value is 0, that imply it can not be configured by web browser.
TELNET
PORT
Configure telnet port
，
the default is 23 port. You can change the value to others.
Example: The IP address is 192.168.1.70. you change the port value to 8023,
the accessing address is telnet 192.168.1.70:8023
RTP
PORT
Enable RTP initial port configuration. It is dynamic allocation
；
Configure the maximum quantity of RTP port. The default is 200
；
DHCP
SERVER
lease
Leased IPMAC correspondence table of DHC. The table will display all device
getting IP address from WIP0020 LAN port by DHCP.
The configuration on this page needs to be saved after modified and will
go into effect after restarting. If the Telnet, HTTP port will be modified, the
port is better to be set as greater than 1024,because the 1024 port system
will save ports.
Set the HTTP port as 0
，
then the http service will be disabled.
Firewall
