WIP0020
Userguide
33
Register Server Port
Set SIP register server signal port
Proxy Server Port
Set SIP proxy server signal port
Register Username
Set SIP register server account username
（
Usually it is
the same with the config port number
）
Proxy Username
Set the SIP proxy server account username
Register Password
Set password of SIP register server account
Proxy Password
Set password of SIP register account
Domain Realm
Enter the sip domain if any, otherwise WIP0020 will use
the proxy server address as sip domain. (Usually it is
same with registered server and proxy server IP
address).
Local SIP Port
Set local signal port
，
the default is 5060
Phone Number
Set assigned phone number
Register Expire Time Set expire time of SIP server register, default is 120
seconds
Detect Interval Time
Set detection interval time of server, default is 120
seconds
RFC Protocol Edition Enable the phone to use protocol edition. When the
phone need to communicate with phones using SIP1.0
such as CISCO5300 and so on, need to modify into
RFC2543. the default is to RFC3261
；
DTMF Mode
Set DTMF sending mode, support RFC2833,
DTMF_RELAY (in-band audio) and SIP info
User Agent
Set the user agent if have, default is common
Enable Register
Configure enable/disable register
Auto Detct Server
Co-work with Server Auto Swap and Detect Interval
Time. Enable this option, WIP0020 will periodically
detect whether the public SIP server is available, if the
server is unavailable, the WIP0020 will switch to the
back-up SIP sever, and continue detecting the public
sip server. WIP0020 will switch back to the primary SIP
server if the server is available again.
Enable
Pub
Outbound Proxy
Configure to enable to use public outbound proxy
，
if you
have no stun server , advise to enable the option
