WIP0020
Userguide
19
4. Press the
or
button to choose the ring address you want, then prese the
button.
5. Enter the phone number you want to designate, then press the
button.
6. Press the
or
button to scan through the ring types available, then press the
button to save the selection.
Changing PIN
The PIN is required for the following options: Registering a new handset, Resetting a handset and the items
under
. The PIN is preset to "0000" at factory. To change the PIN code:
1. Press the
button.
2. Press the
or
button to choose
, then press the
button.
3. Enter the current PIN, then press the button.
Result:
The LCD window does not display the PIN you entered in order to maintain secrecy. If you enter a
wrong PIN, your phone returns to Standby mode.
4. Enter a four-digit PIN you want to use, then press the
button.
5. Enter the new PIN again to confirm the number, then press the
button.
Setting Access Code
Some telephone system requires an access code (9, for example) and listen to a second dial tone before
dialing an outside number. You can set your phone to insert one-digit access code automatically when you
use a phone number from your Call ID list.
1. Press the
button.
2. Press the
or
button to choose
, then press the
button.
3. Enter the one-digit access code using the number keypad.
Note
:
When you dial a phone number in the Call Log list, the number will be dialed following the access code
and a preset pause time.
4. Press the
button to save the selection.
Registering a New Handset
The handset which comes with the base unit was already registered as handset 1. Each additional handset
you purchase must be registered to the base unit.
Note:
A handset can be registered to up to 4 different base units. And a base can be used with up to
6 handsets.
