WIP0020
Userguide
6
Notes:
The batteries need to be replaced if they do not recover their full storage capacities after recharging.
When replacing the batteries, always use good quality Ni-MH re-chargeable batteries. Never use other
batteries or conventional alkaline batteries
Important Note:
Before initial operation,
YOU SHOULD
FULLY CHARGE THE HANDSET
for about
14-16
hours.
To charge the handset, you should place it on the base.
Result:
When you place the handset on the base, the handset
automatically turns on and the charging LED on
during the charge.
Using Handset Carrying Clip
The supplied handset carrying clip allows If you want to attach the carrying clip:
you to conveniently carry the handset with
Attach the carrying clip to the back of
you. It clips easily to your belt, waist hand,
the handset. Make sure that the carrying
or shirt pocket.
clip locks into place.
If you want to remove the carrying clip
Insert a screw driver along the edge of
one of its arms and release the clip.
Then lift it off.
Using Headset ( optional)
The headset jack is located in the middle
right side of the handset and is 2.5mm
standard plug. Simply plug the headset into
the jack and the headset will be activated.
Note:
