IP-COM AP345, User Manual

Page: 45 / 130

Wireless Access Point
User Guide
Parameter Description
Tip
This AP can hide its SSID automatically. When an SSID’s connected
devices number reaches its max number of clients, the AP stops
broadcasting the SSID.
Isolate Client
−
Enable : It indicates that the wireless devices connected to the AP with
the selected SSID cannot communicate with each other, which
improves WiFi network security.
−
Disable : It indicates that the wireless devices connected to the AP
with the selected SSID can communicate with each other. By default,
Isolate Client is disabled.
WMF
−
Enable : It indicates that the WMF function is enabled.
−
Disable : It indicates that the WMF function is disabled. By default,
WMF function is disabled.
Suppress
Broadcast Probe
Response
−
Enable : It indicates that the Suppress Broadcast Probe Response
function is enabled. After this function is enabled, this device does not
respond to the requests without an SSID, saving wireless resources.
−
Disable : It indicates that the Suppress Broadcast Probe Response
function is disabled. By default, the function is disabled.
Max. Number of
Clients
It specifies the maximum number of devices that can be concurrently
connected to the WiFi network corresponding to an SSID.
After this upper limit is reached, the AP rejects new requests from
devices for connecting to the wireless network.
SSID If you want to change the selected SSID, enter the new SSID in this box.
Chinese SSID
Encoding
It specifies the encoding format of Chinese characters in an SSID. The
default value is UTF-8 . This parameter takes effect only if the SSID
contains Chinese characters.
Security Mode
It specifies the security mode of the selected SSID. The options include:
None , WEP , WPA-PSK , WPA2-PSK , Mixed WPA/WPA2-PSK , WPA and
WPA2 . Refer to following contents for details about these options.

None
It allows any wireless device to connect to the WiFi network. This option is not
recommended because it leads network insecurity.
38