Wireless Access Point
User Guide
Parameter description
Parameter
Description
SSID
It specifies the SSID on which the MAC address access control is
implemented.
MAC Filter Mode
It specifies the mode to disallow/allow device with specific MAC
addresses to access the selected SSID, or allow all devices to access the
selected SSID.
−
Disable
: It indicates that access control function is disabled.
−
Allow
: It indicates that only the wireless devices in the access
control list can access the specific WiFi network with the selected
SSID.
−
Disallow
: It indicates that only the wireless devices in the access
control list
cannot
access the specific WiFi network with the
selected SSID.
7.6.3
Example
Networking requirement
2.4 GHz WiFi network with a SSID
Hotel WiFi
has been set up in a hotel. However, it is
required that only staffs are allowed to connect to this WiFi network.
It is recommended for the administrator to configure AP’s access control function. Assume
that these staffs have three wireless devices with the following three MAC addresses:
C8:3A:35:00:00:01
C8:3A:35:00:00:02
C8:3A:35:00:00:03
Procedures
: (
2.4 GHz Access Control
is used here because
Hotel WiFi
is 2.4 GHz WiFi network.)
1.
Choose
Wireless
Settings
>
Access Control
.
2.
SSID
: Select
Hotel WiFi
from the
SSID
drop-down list box.
3.
MAC Address Filter Mode
: Select
Allow
from the drop-down list box.
4.
MAC Address
: Enter
C8:3A:35:00:00:01
in the access control list and click
Add
. Repeat
this step to add
C8:3A:35:00:00:02
and
C8:3A:35:00:00:03
as well.
5.
Click
Save
.
77
Summary of Contents for AP345
Page 1: ...User Guide 11AC Dual Band Ceiling Access Point AP345...
Page 58: ...Wireless Access Point User Guide Select Ethernet and click Next Select Group and click Add 51...
Page 63: ...Wireless Access Point User Guide Click Add Click Manually create a network profile 56...
Page 124: ...Wireless Access Point User Guide 3 Click Details 117...
