Wireless Access Point
User Guide
Wait for the automatic reboot of the AP.
2.
Configure the switch.
Create IEEE 802.1Q VLANs described in the following table on the switch.
Port Connected
To
Accessible VLAN ID
Port Type
PVID
AP
1, 2, 3, 4
Trunk
1
Internal server
3, 4
Trunk
1
Router
2, 4
Trunk
1
Retain the default settings of other ports. For details, refer to the user guide of the
switch.
3.
Configure the router and the internal server.
To ensure your wireless devices connected to the AP can access the internet, you should
configure QVLAN function on your router and internal server which support QVLAN
function. Detailed VLAN parameters are listed as follows:
VLAN parameters configured on your router:
Port Connected
To
Accessible VLAN ID
Port Type
PVID
Switch
2, 4
Trunk
1
VLAN parameters configured on your internal server:
Port Connected
To
Accessible VLAN ID
Port Type
PVID
Switch
3, 4
Trunk
1
For configuration details, refer to the user guides of your router and internal server.
---End
Verification
Wireless devices connected to the SSID
internet
can access only the internet. Wireless
devices connected to the SSID
oa
can access only the intranet. Wireless devices connected
to the SSID
VIP
can access both the internet and the intranet.
84
Summary of Contents for AP345
Page 1: ...User Guide 11AC Dual Band Ceiling Access Point AP345...
Page 58: ...Wireless Access Point User Guide Select Ethernet and click Next Select Group and click Add 51...
Page 63: ...Wireless Access Point User Guide Click Add Click Manually create a network profile 56...
Page 124: ...Wireless Access Point User Guide 3 Click Details 117...
