Wireless Access Point
User Guide
7.6
Access control
7.6.1
Overview
It specifies that you can allow/disallow wireless devices with specified MAC addresses to
access the AP’s WiFi networks. The AP supports the following MAC address filter modes:
−
Disable
: It indicates that the access control function is disabled.
−
Allow
: It indicates that only the wireless devices with the specified MAC addresses
can access the specific WiFi network of AP.
−
Disallow
: It indicates that only the wireless devices with the specified MAC addresses
cannot access the specific WiFi network of AP.
7.6.2
Configuring access control
1.
Choose
Wireless
Settings
>
Access Control
.
2.
Click a tag page as required, which is
2.4 GHz Access Control
in this example.
3.
From the
SSID
drop-down list box, select the SSID on which the address access control
function is implemented.
4.
Select an access control mode from the
MAC Address Filter Mode
drop-down list box.
-
If you select
Disable
, the Access Control function will be disabled.
-
If you select
Allow
or
Disallow
, enter the MAC addresses you want to control in the
access control list and click
Add
.
-
If you want to control a wireless device that has been connected to the AP, directly
click
Add
corresponding to the device.
5.
Click
Save
.
---End
Access control
list
76
Summary of Contents for AP345
Page 1: ...User Guide 11AC Dual Band Ceiling Access Point AP345...
Page 58: ...Wireless Access Point User Guide Select Ethernet and click Next Select Group and click Add 51...
Page 63: ...Wireless Access Point User Guide Click Add Click Manually create a network profile 56...
Page 124: ...Wireless Access Point User Guide 3 Click Details 117...
