Wireless Access Point
User Guide
value
0
indicates that a device can send only one packet through a channel after
winning contention for the channel.
ACK Policies
WMM specifies the Normal ACK and No ACK policies.
−
According to the No ACK policy, no ACK packet is used during wireless packet
transmission to acknowledge packet reception. This policy is applicable to scenarios
where interference is mild and can effectively improve transmission efficiency. In
case of strong interference, lost packets are not sent again if this policy is adopted.
This leads a higher packet loss rate and reduces the overall performance.
−
According to the Normal ACK policy, each time a receiver receives a packet, it sends
back an ACK packet to acknowledge packet reception.
7.5.2
Changing the WMM settings
By default, the WMM function of the AP is enabled and the
Optimized for scenario with
more than 10 users
mode is adopted. The following procedures describe how to set the
WMM settings:
1.
Choose
Wireless
Settings
>
WMM Setting
.
2.
Click a tag page as required, which is
2.4 GHz WMM
in this example.
3.
Set
WMM Settings
to
Enable
.
4.
Optimization Mode
: Select the required WMM optimization mode. If you select
Custom
,
set the WMM parameters as required.
5.
Click
Save
.
74
Summary of Contents for AP345
Page 1: ...User Guide 11AC Dual Band Ceiling Access Point AP345...
Page 58: ...Wireless Access Point User Guide Select Ethernet and click Next Select Group and click Add 51...
Page 63: ...Wireless Access Point User Guide Click Add Click Manually create a network profile 56...
Page 124: ...Wireless Access Point User Guide 3 Click Details 117...
