BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
8
ASSEMBLY INSTRUCTIONS CONTINUED
5.
Attach the side covers (E,F) to the main
frame using 2 screws (c) as shown.
Repeat this step for the other side cover.
6.
Next place the computer rack assembly
(G) onto the left and right uprights (C/D).
7.
Connect the control wire harness pulled
out from the upright tubes to the control
wire harness on the computer rack
assembly.
8.
Next attach the computer rack assembly
to the uprights using the 4 (b) bolts.
NOTE : When fasten the bolt, please pay
attention not to press the control
cable inside the tube.
