Resetting the administrator password
This procedure should only be used if there are no administrator users with valid passwords. If a non-administrator user, or another
administrator, forgets their password, another administrator user can reset it for them if you have created more than one administrator user.
Refer to
Modifying a user
for more information. Resetting the Iomega StorCenter px4-300r will result in all administrator users reverting to
non-administrator users and any manual network configuration settings will have to be reset.
1. To reset the Iomega StorCenter px4-300r press the small recessed button on the back. The Iomega StorCenter px4-300r will restart and all
administrator users will revert to non-administrator users.
2. When your Iomega StorCenter px4-300r device finishes restarting, open the Iomega StorCenter px4-300r Console. The Device Setup steps will appear
again. Create an administrator user. You can use the same name as a previously created user, since this process will make that user an administrator.
3. Complete the Device Setup as described in
Setup
.
If you had more than one administrator user, you will need to edit each user individually to make them administrators again. Refer to
Modifying a user
.
105
Iomega StorCenter px4-300r
