Iomega StorCenter px12-450r User Manual Download | Manualshive

Page: 64 / 179

background image

Iomega StorCenter px12-450r User Guide

52

2.

Check

Add drives to storage system

to add a newly installed drive. You see this option only if

there is at least one unused drive on the px12-450r.

3.

To change the protection, choose a value from the drop-down menu:

Mirror (RAID 10)

Uses half of the storage space for protection, leaving half for actual data.

Parity (RAID 5)

Uses 1/4 of the storage space for protection, leaving 3/4 for actual data.

Double Parity (RAID 6)

Combines six or more drives in a way that protects data against loss of any two drives.

Striped (RAID 0)

Distributes data across several drives in a way that gives improved speed at any given instant.

None

Turns off data protection and leaves your data vulnerable to data loss.

4.

Select a value for disk write caching.

5.

Check

Enable periodic consistency check

to enable a monthly parity or mirror consistency

check. The check helps to prevent a single drive failure from becoming a two-drive failure,
resulting in data loss. The check runs for several hours and can affect performance of the
px12-450r . If you do not want to run the check, uncheck this option.

6.

Check

Use available drives as hot spares

to allow unused drives to become part of a RAID-

protected storage pool. If a drive in a Storage Pool fails, all the data on that drive can be
mirrored to the hot spare drive.

7.

Click

Apply

to save your changes.

The Drive Management page displays a table that provides the following information about existing
Storage Pools.



Name

— The name of the Storage Pool.



Protection

— The type of protection assigned to the Storage Pool.



Capacity

— The total amount of storage in the Storage Pool.



Used/Available

— Used is the space allocated to Shares. It is also space allocated to iSCSI

drives. Available is the difference between capacity and used.

Drive status

An image on the Drive Management page provides information on the drive status of your px12-450r.
The image displays the physical layout of drives and the drive slot numbers. If a drive has a circled
letter, it is a member of a Storage Pool. If you hover your mouse over a drive in the image, the
ToolTip displays the drive model, size, and status, including if the drive is failing. If you hover your
mouse on either a Storage Pool name in the table or on a drive in the Storage Pool image, all drives
in the Storage Pool are highlighted.

«
...
62
63
64
65
66
...
»

Summary of Contents for StorCenter px12-450r




















































































































































































Reviews:

No comments

Related manuals for StorCenter px12-450r

Brand: H3C Pages: 21

Asynchronous SH7145F

Brand: Renesas Pages: 17

Brand: H3C Pages: 77

Brand: Delta Electronics Pages: 1

Brand: TRENDnet Pages: 2

IE-SW-VL16-14TX-2SC

Brand: Weidmuller Pages: 17

Brand: Juniper Pages: 825

Brand: OpenVox Pages: 13

Brand: Altera Pages: 42

Brand: ZyXEL Communications Pages: 422

ELITENAS EN104L+(B)

Brand: Sans Digital Pages: 9

Brand: Talent Pages: 18

Brand: Aaeon Pages: 57

Brand: Juniper Pages: 196

AlterPath Manager 2500

Brand: Cyclades Pages: 368

Brand: swiftech Pages: 2

Emulation Memory Board R0E330850MSRC0

Brand: Renesas Pages: 4

Brand: Gbord Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands