6.Turn on your TV set and set it to the appropriate video input.
Adjust the volume
level of your TV or stereo.
Most TVs will have either
AUX
(auxiliary) or
VIDEO
input channels. Many TV remote
controls have either a
TV/VCR
or a
TV/VIDEO
button that changes the video input.
Refer to the manual that came with your TV for more information on choosing the
appropriate video input channel. If you hooked the audio channel to a stereo or AV
receiver, turn it on.
NOTE:
If you are connecting the FotoShow™ Image Center to a VCR or AV receiver,
you will need to turn on the VCR or receiver as well as the TV. You may also need
to adjust the video input on the VCR or receiver. See the user’s manual that came
with the VCR or AV receiver for more information.
7.Insert the Zip
®
disk that came with your FotoShow
™
Image Center and view the
FotoShow Image Center tutorial.
For more information on viewing the tutorial, see
“Viewing the FotoShow
™
Tutorial”
at the end of this chapter.
Other Types of Connections
Your FotoShow
™
Digital Image Center can be attached to almost any TV. If your TV does
not have the RCA connectors described above, you will need to determine which
connection type is appropriate for you. Refer to the manual that came with your TV, VCR,
or AV receiver or look at the back of the device to which you will be hooking your
FotoShow image Center to determine the type of connectors that are available. Select the
appropriate connector for your TV, VCR or AV receiver, pictured below.
S-Video Cable*
Your FotoShow
™
Digital Image Center can be connected to your TV or VCR using an
S-Video cable. S-Video carries the highest quality video signal that your FotoShow Image
Center supports; however, only high end TVs have S-Video connectors. Your FotoShow
™
Image Center does not include an S-Video cable. For information on connecting your
FotoShow Image Center to a TV, VCR, or AV receiver using an S-Video connector, continue
to the next page.
RF Cable*
10
FotoShow
™
Digital Image Center User’s Manual
* Your FotoShow
™
Image Center does not come with an S-Video cable or an RF modulator. To use these connection
options, you will need to purchase an S-Video cable or RF Modulator (available from your local electronics store or directly
from Iomega at
http://www.iomegadirect.com
). S-Video cables carry video signals only. You will still need to connect the
red and white connectors on the RCA cable included with your FotoShow
™
Image Center to hear any sound.
