B
C
D
Using a 5/16” (7.9mm) socket ratchet/driver,
remove the bolts securing the top hinge to the
cabinet. Lift the hinge support straight up to
free the hinge pin from the socket in the top
of the door.
Remove the tape from the right door and tilt
the door away from the cabinet. Lift the door
off the center hinge pin.
Set the door on a non-scratching surface with
the inside up.
1
REMOVING RIGHT DOOR
Remove the hinge cover on top of the right
fresh food door by removing the screw using a
Phillips screwdriver.
A
2
REMOVING LEFT DOOR
Remove the hinge cover on top of the left
fresh food door by removing the screw using a
Phillips screwdriver.
A
B
C
Unplug the 3 wire connectors and move the
wires until you can see the screws holding the
hinge.
Using a 5/16” (7.9mm) socket/ratchet driver,
remove the bolts securing the top hinge to the
cabinet.
Lift the hinge straight up to free the hinge pin
from the socket in the top of the door and pass
the wire through the slot in the hinge.
D
E
Remove the tape from the door, open the
door 90 degrees and tilt the door away from
the cabinet. Lift the door off the center hinge
pin.
Set the door on a non-scratching surface with
the inside up.
3
REMOVING CENTER HINGES AND
BRACKETS
Using a 1/4” (6.4mm) Allen wrench, remove
the 2 hinge pins from the hinge brackets.
A
B
Using a 5/16” (7.9mm) socket/ratchet driver,
remove the bolts securing the center hinge
brackets to the cabinet.
C
Lower the front end of the freezer drawer
assembly so the side tabs fit into the front slots
on the rail assemblies.
12
