MH860 series hydraulic servo drive
Operating through the LED panel
39
Press 1s
Shortcut mode
MODE
Quick setup mode
SET
MODE
Monitoring mode
SET
MODE
Setup mode
SET
MODE
Debug mode
MODE
Multi-pump mode
SET
SET
Press
to display a next shortcut
parameter ID and release it to display the value.
Initial state, in speed or fault display
MODE
5.2.2 Shortcut mode
In shortcut mode, you can press the
key to quickly observe the important parameters of
drive. In lock state, if you press and hold the
key for 1s to enter the shortcut mode,
the LED displays the values of selected parameters. If you press the
key, the LED
displays the next parameter ID. If you release the
key, the LED displays the parameter
value.
Note: In shortcut mode, if no key acts within 1min, the speed or fault display interface
automatically appears.
Parameters displayed in shortcut mode:
ID
DEFINITION
RANGE
UNIT
SPD
Speed feedback
[-6000,6000]
rpm
CUR
Current feedback
[0,900.0]
A
RES
Resolver feedback
[0,4096]
-
PRS
Pressure feedback
[0,500]
bar
PIDS
PID step no.
[0,3]
-
5.2.3 Quick setup mode
If you press the
MODE
key to select the quick setup mode, the LED value places display "E--xx",
