yes, can
installation site
e in actual usage is above
Additionally,
Check that the ambient temperature is below
Check that the incoming supply voltage is correspondent to the rated voltage
e
current
to use
4. Check whether the name plate is consistent with the model identifier on the
or whether the enclosure is damaged
procedures
Quick Start
5
2
Quick Start
2.1 What this chapter contains
This chapter mainly describes the basic guidelines during the installation and commission
, which you may follow to install
and commission the
quickly.
2.2 Unpacking inspection
Check as followings after receiving products:
1. Check whether the packing box is damaged or dampened. If yes, contact local dealers or
INVT offices.
2. Check the model identifier on the exterior surface of the packing box is consistent with the
purchased model. If no, contact local dealers or INVT offices.
3. Check whether the interior surface of packing box is abnormal, for example, in wet condition,
or cracked. If yes, contact local dealers or
INVT offices.
exterior surface of the packing box. If not, contact local dealers or INVT offices.
5. Check whether the accessories (including user's manual and control keypad) inside the
packing box are complete. If not, contact local dealers or INVT offices.
2.3 Application confirmation
Check the machine before beginning
:
1. Check the load type to verify that there is no overload of the
during work and check
whether the
needs to modify the power degree.
2. Check that the actual current of the motor is less than the rated
.
3. Check that the control accuracy of the load is the sam .
4.
.
2.4 Environment
Check as followings before the actual installation and usage:
1.
40°C. If exceeds, derate
1% for
every additional 1°C.
cannot
be used if the ambient temperature is above
50°C.
Note:
the ambient temperature means
the air temperature inside the cabinet.
2. Check that the ambient temperatur
-10°C. If not, add
heating facilities.
Note:
the ambient temperature means
the air temperature inside the cabinet.
3. Check whether the
altitude is less than
1000
meters. If
run at the rated power.
When the installation site altitude is greater than 1000 meters but less than 3000 meters, derate