can set 16 step speed which can be selected by the combination code of multi
carr
can control 16
, but now can realize this
can change the running
Basic Operation Instruction
107
Sx
Sy
Up terminal function selection=10
DOWN terminal function
selection=11
UP terminal state
DOWN terminal state
T
F
T
T
UP terminal frequency increasing integral rate E08.45
DOWNterminal frequency increasing integral rate E08.46
7.8 Simple PLC
Simple PLC function is also a multi-step speed generator.
frequency, direction to meet the need of processing according to the running time automatically. In
the past, this function needs to be assisted by external PLC
function by itself.
-step speed with 4 groups of ACC/DEC time.
The multi-function digital output terminals or multi-function relay output an ON signal when the set
PLC finishes a circle (or a step).
Running parameter
setting in all stages
in PLC
Restart from the first
stage
Restart form the
frequency of the pause
stage
Stop after running
one time
Run at the final
value after running
for one time
Cycle
0
1
2
E10.00
（
simle PLC
）
PLC method
0
1
0
1
0
1
Normal running
E10.01
（
simple PLC memory seleciton
）
Power off
without memory
Power off with
memory
E10.36
(PLC restart selection)
E17.00
Power off during running
Terminal function 23
Simple PLC stop reset
Set frequency
200ms
200ms
Digital output 15
Simple PLC stage completion
Digital output 20
Simple PLC cycle completion
7.9 Multi-step speed running
Set the parameters when the
ies
out multi-step speed running.
-step speed
terminals 1
–4. They correspond to multi-step speed 0 to 15.
