percentage of rated current . The bigger the
Set the threshold point:
the time is 0, the DC brake is invalid. will
block the
Function Parameters
43
Function
code
Name
Description
Default
value
Modify
before DC
braking
Waiting time before DC braking:
output before starting the DC braking. After this
waiting time, the DC braking will be started so as
to prevent over-current fault caused by DC braking
at high speed.
DC braking current: The value of
DC braking current is, the greater the braking
torque is.
DC braking time: The retention time of DC brake. If
stop at the set deceleration time.
E 01.23
ACC
Constant
speed
DEC
ON
T
E13.14
E01.04
E01.10
E13.15
E01.12
E01.09
: 0.00Hz
(the max. frequency)
: 0.00
–50.00s
: 0.0
–100.0%
: 0.00
–50.00s
E01.11
DC braking
current
0.0%
○
E01.12
DC braking
time
0.00s
○
E01.13
Dead time of
FWD/REV
rotation
During the procedure of switching FWD/REV
rotation, set the threshold by
, which is as
the table below:
Output frequency
FWD
REV
T
Starting
frequency
Shift after the
zero frequency
Shift after the
starting frequency
Shift after the
stopping speed
Stopping
speed
Dead
zone
Setting range: 0.0
–3600.0s
0.0s
○
E01.14
Shifting
between
FWD/REV
rotation
0: Switch after 0 frequency
1: Switch after the starting frequency
2: Switch after the stopping speed
1
◎
