19
ZR10-D controller
•
Installation and operating instructions
Installing the fan cable (lush mounted dual box)
Requirements:
Wall opening is ready.
Power cable is installed.
► Install 3-wire
round cable (1) from fan to the
lush mounted dual box.
► Allow round cable (1) to extend approximately
150 mm out of the wall opening (2).
1
2
Fan cable is installed.
Installing the power cable (surface mounted box)
Requirements:
Boreholes are ready.
►
Install power cable (2) to the lower borehole (1).
► Allow power cable (2) to extend approximately
150 mm out of the borehole (1).
1
2
Power cable is installed.
assembly anD InsTallaTIon
