45
ZR10-D controller
•
Installation and operating instructions
11
Troubleshooting and disposal
Troubleshooting
The table below contains an overview of potential faults, causes and remedies. Contact your retailer
if the problem persists. For details, see section 11: Warranty and service.
fault
cause
remedy
LED not
illuminated
Power stage 0 is selected.
Turn rotary button to a different power stage
LED fault
Replace controller
Installation error
Check that cables are correctly connected.
Check connectors for proper it
Rotary button
not rotable over
the entire range
Rotary button is not installed in
the zero position
Check horizontal orientation of the slot of
the shaft.
Correct orientation of the slot with screw-
driver.
Fan rotor not
rotating
Fan cable connected incorrectly
Check that cables are properly connected.
Check connector for proper it
Controller fault
Replace controller
Disposal
Dispose of the product in line with applicable national regulations.
The products described in these installation and operating instructions are broadly recyclable given
their ecologically compatible manufacturing processes. Please contact a waste management com-
pany specialising in electronic equipment for environmentally sustainable recycling and disposal of
your old system.
Recommendations for disposal can be found in the table below.
Product
material
Disposal
Surface mounted box
PVC
Recycling centre
Flush mounted dual box
PP
Recycling centre
Cabinet mounted box
PVC
Recycling centre
Frame, cover, rotary button
PC
Recycling centre
Shaft
Polyamide
Recycling centre
Separating plate
PVC
Recycling centre
Controller casing
Polyamide
Recycling centre
Support ring
Zinc-coated iron
Recycling centre
Controller board
Epoxide / copper
Drop-off centre for electronic equipment
Transformer
Iron / copper
Drop-off centre for electronic equipment
TroUblesHooTIng anD DIsPosal
