15
Document Number
DCV-00206
Date Released
Dec. 2016
Revision Number/Security level
R00 S2
Retrofit G7+InvencoLink Wayne Ovation (US) Installation Guide
Fig 4
–
location of card reader panel screws
8.
Unplug every cable on the QCAT Board Assembly and unscrew any ground screws that may be
fastened to the board. The amount of connections may vary depending on customer
specifications when the dispenser was purchased, however, each cable must be unplugged
regardless. (Fig 6)
Note:
For Side A only, mark the Pump communication cable (Purple & Brown wires) for re-
connection in a later step. All of these other wires can be discarded.
