4
Document Number
DCV-00206
Date Released
Dec. 2016
Revision Number/Security level
R00 S2
Retrofit G7+InvencoLink Wayne Ovation (US) Installation Guide
1 Introduction
The documentation provides some basic guidelines for installing the Optic 12 / G7 Outdoor Payment
Terminal (OPT) system.
This Retro-Fit Kit can be installed into either Side A or Side B of a Wayne Ovation dispenser;
For a single-sided installation, or if this Kit will be installed into Side A (i.e. the first side
installed) of a double-sided installation, it requires the pre-installation of UL Listed by Report
Retrofit Kit Part Number 6009-0008-8801 (InvencoLink Converter) before installation into the
dispenser.
The process is covered in §4.2 Pre-Installation Procedure of this instruction, by reference
to the instructions in that Kit.
For a double-sided installation, two of these Kits are required.
1.1
Tools Required
The following tools are required to mount the G7 OPT:
Torx T25 security screwdriver
Philips #1 screwdriver
Philips #1 screwdriver with >5” shaft
Flat 5mm screwdriver
Small adjustable spanner
Side cutters
Cable (zip) ties
Pliers
¼” Socket or Nut Driver
Small flat blade scraper or putty
knife.
Towelling cleaning rags.
Household sticky residue remover
containing limonene.
e.g. Goo Gone®
100% Isopropyl Alcohol (IPA)
cleaner.
WARNING
Do NOT
use power tools if working on a fuel station forecourt.
Any spark could cause an explosion.
