43
Document Number
DCV-00206
Date Released
Dec. 2016
Revision Number/Security level
R00 S2
Retrofit G7+InvencoLink Wayne Ovation (US) Installation Guide
d. Place each Exciter in turn in position on the inside of the Pump Door. Press gently on the
rear of each Exciter in the five positions and hold pressure for at least thirty seconds to
enable the adhesive to stick properly.
e. There will be two 2-wire audio cables connected into the Display RFK Panel, with their
other ends left unconnected. Viewed from the inside of the Pump Door, connect the left-
hand Exciter to the white audio cable marked RIGHT, and the right-hand Exciter to the
white audio cable marked LEFT.
Each cable must be connected such that the plain WHITE wire goes to the RED terminal,
and the WHITE/BLACK wire goes to the BLACK terminal.
31. Use cable ties to tidy up the installation. Excessive lengths should be bundled and tied so they
stay inside the pump cabinet frame.
32. For a double-sided installation (i.e., for Side B), please repeat Steps 1-5 and 7-31.
Remove paper
Press for 30 seconds
White
into Red
White/Black
into Black
