Invacare® Pronto™ M61 Series with SureStep®
WARNING!
Risk of serious injury or damage
Improper positioning while leaning or bending could
cause the wheelchair to tip forward resulting in serious
injury or damage.
–
To assure stability and proper operation of your
wheelchair, you must at all times maintain proper
balance. Your wheelchair has been designed to remain
upright and stable during normal daily activities as long
as you DO NOT move beyond the center of gravity.
DO NOT lean forward out of the wheelchair any
further than the length of the armrests.
–
DO NOT attempt to reach objects if you have to
move forward in the seat or pick them up from the
floor by reaching down between your knees.
1.
Engage motor locks and turn power off before reaching, leaning
or bending only as far as your arm will extend without changing
your sitting position.
2.
Position the casters so that they are extended away from the
drive wheels.
3.
Engage wheel locks/motor locks/clutches.
6.4
Reaching, Bending - Backward
WARNING!
Risk of injury
Leaning backward over the top of the seat back will
change your center of gravity and may cause you to tip
over resulting in injury.
–
Proper positioning is essential for your safety. DO
NOT lean over the top of the seat back.
1.
Position wheelchair as close as possible to the desired object.
2.
Position the casters so that they are extended away from the
drive wheels to create the longest possible wheelbase.
3.
Engage the motor locks and turn power off.
4.
Reach back only as far as your arm will extend without changing
your sitting position.
6.5
Getting in and out of the mobility device
–
The armrest must be removed or swiveled up in order
to get into or out of the mobility device from the side.
6.5.1
Information about getting in and out
36
1590425-A
Summary of Contents for Wheelchair Pronto M61
Page 46: ...Invacare Pronto M61 Series with SureStep Use only batteries of the same type 46 1590425 A...
Page 65: ...Notes...
Page 66: ...Notes...
Page 67: ...Notes...
