Invacare® Pronto™ M61 Series with SureStep®
•
Invacare strongly recommends securing the mobility device to
the floor of the transporting vehicle.
Proceed as follows to disassemble the mobility device for transport:
1.
Disconnect the remote. Refer to 9.4.1 Disconnecting/Connecting
the remote, page 56.
2.
Remove the seat. Refer to 9.4.2 Removing/Installing the seat,
page 56.
3.
Remove the top shroud. Refer to 9.4.3 Removing/Installing the
top cover, page 57.
4.
Remove the batteries. Refer to 9.4.4 Removing/Installing the
batteries, page 57.
9.4.1
Disconnecting/Connecting the remote
Disconnecting the remote
1.
Switch the remote OFF.
2.
Pull the plug
A
of the remote cable to disconnect the remote
from the controller connector
B
.
Connecting the remote
WARNING!
The remote connector and controller connector
fit together in one way only.
–
Do not force them together.
1.
Lightly push to engage the plug
A
of the remote cable and the
controller connector
B
.
9.4.2
Removing/Installing the seat
CAUTION!
Risk of strains from lifting heavy parts!
–
Use proper lifting techniques.
Removing the seat
1.
Pull the detent lever
A
up and turn the seat to one side.
Prevent the seat from engaging with the seat post again.
2.
Release the detent lever.
56
1590425-A
Summary of Contents for Wheelchair Pronto M61
Page 46: ...Invacare Pronto M61 Series with SureStep Use only batteries of the same type 46 1590425 A...
Page 65: ...Notes...
Page 66: ...Notes...
Page 67: ...Notes...
