3.
Hold the seat assembly
B
firmly by the backrest and front edge
of the seat.
4.
Lift the seat assembly up and away from the seat post
D
.
Installing the seat
1.
Align the seat pivot (
C
, hidden from view) with the seat post
D
.
2.
Pull the detent lever
A
up and lower the seat assembly
B
on
the seat post.
If necessary, slightly twist seat assembly back and forth to lock
it in place.
3.
Release the detent lever.
4.
Pull the seat assembly up to ensure that it is locked in place.
9.4.3
Removing/Installing the top cover
The top cover cannot be completely removed from the
mobility device without disconnecting the remote cable.
Removing the top cover
1.
Remove the remote cable
A
from the clip
B
of the top cover
D
.
2.
Remove the top cover by pulling it off the frame
E
.
Installing the top cover
1.
Pull the remote cable
A
through the center hole
C
in the top
cover.
2.
Place the top cover
D
on the frame
E
and push downward to
engage the hook and loop straps
F
.
3.
Secure the remote cable using the clip
B
on the top cover.
9.4.4
Removing/Installing the batteries
WARNING!
Fire and burn hazard due to short circuit at
battery poles
–
DO NOT short-circuit the battery poles with a tool
or metal parts of the mobility device.
–
Make sure that the battery pole caps are attached at all
times when you are not working on the battery poles.
CAUTION!
Risk of crushing
The batteries are very heavy. There is a risk of hand
injury.
–
Be aware that the batteries are very heavy.
–
Handle the batteries with care.
1590425-A
57
Summary of Contents for Wheelchair Pronto M61
Page 46: ...Invacare Pronto M61 Series with SureStep Use only batteries of the same type 46 1590425 A...
Page 65: ...Notes...
Page 66: ...Notes...
Page 67: ...Notes...
