Invacare® Pronto™ M61 Series with SureStep®
Removing the batteries
1.
Disconnect the front battery
A
from the controller (BLACK
connector
B
).
2.
Disconnect the rear battery
C
from the front battery (RED
D
and BLACK
E
connectors).
3.
Lift rear and front battery out of the battery tray using the
battery handles.
Installing the batteries
Ensure that both batteries are properly seated and resting
on the battery tray.
1.
Position the front battery
A
in the battery tray.
2.
Position the rear battery
C
in the battery tray.
3.
Connect the rear battery to the front battery (RED
D
and
BLACK
E
connectors).
4.
Connect the front battery to the controller (BLACK connector
B
).
9.4.5
Reassembling the mobility device
Proceed as follows to reassemble the mobility device:
1.
Install the battery boxes. Refer to 9.4.4 Removing/Installing the
batteries, page 57 .
2.
Install the top cover. Refer to 9.4.3 Removing/Installing the top
cover, page 57.
3.
Install the seat. Refer to 9.4.2 Removing/Installing the seat, page
56.
4.
Connect the remote. Refer to 9.4.1 Disconnecting/Connecting
the remote, page 56.
58
1590425-A
Summary of Contents for Wheelchair Pronto M61
Page 46: ...Invacare Pronto M61 Series with SureStep Use only batteries of the same type 46 1590425 A...
Page 65: ...Notes...
Page 66: ...Notes...
Page 67: ...Notes...
